VideoSecu Universal LCD/DLP Projector Ceiling Mount Bracket White Fits both flat or Vaulted ceiling PJ2W 1CA
- VideoSecu brand. Please report to Amazon.com if you recieve a mount without VideoSecu logo. Extension poll included. 5.5in without extension poll. Height is adjustable from 16.9″ to 25.6″ ( 43-65 cm ). Ceiling plate adjustable 0 to 90 degree, fits Vaulted ceiling
- Mounting arms removable and extendable, extra extension adaptor included.
- Heavy duty steel construction, Maximum loading 44 lbs (20 kgs)
- Integrated cable management; Exclusive “No-slip” adjustment system; Lock in any position; Easily release and lock;
- Standard size hardware included to fasten to your projector and your ceiling included; Comprehensive product installation manual included;
Product Description
This mount is VideoSecu brand. Please report to Amazon.com if you recieve a mount without VideoSecu logo. Universal mount features a flexible mounting system that can be used with most projector model, and it has the versatility to attach to nearly any ceilingl. The mounting interface features four double-jointed support arms that allow flexible positioning to reach almost any mounting point of the projector. Each arm can be precisely positioned to avoid covering important projector ventilation and access points used for lamp and air filter replacement. This minimizes heat build-up and maximizes lamp life. Its robust construction allows the mount to positively hold the projector fixed at nearly any angle. This universal mount’s tilt and roll can be adjusted independently of one another, compared to the clumsier adjustments needed for ball-and-socket mounts. it comes with an adjustable channel and ceiling plate. This allows the projector to be mounted at an adjustable height from the ceiling. This auction is for 1 set of White projector ceiling mount. Does this mount fit my projector? Please look at the mounting screws on the top of your projector. Measure the distance between the holes. If your projector has 3 holes pattern or 4 hole pattern, and the maxim distance between any two holes is less than 12.5 inch/32 cm, then this mount will fit your projector.
I bought this mount to be used in a church, Also had a projector that needed a special mount for very close 4 hole mount. This mount was just what the Dr. ordered. Mounts to normal studs just fine, if you turn it the right way… Fixing to order a second one for a rear mount projector to our church.
Rating: 5 / 5
This did the job that was needed!! I used this mount for an Inforcus projector for our theatre room. First off, prior reviews made me suspect of buying this because they stated flimsy quality, mount, hardware, etc. I hooked this too a stud in the ceiling and it easliy held my wife a couple feet from the floor!!!!!!! The instructions could be a little bit better, but its pretty much common sense. Pitch and yaw angles are minimal, but will get the job done to make sure your have a straight picture. I even hooked this mount to an Optoma just to see if it would fit and no suprises it did with ease. If you contemplating this mount, I would say get it!! it is surely worth the cheap price and the delivery time was amazing as well!
Rating: 5 / 5
Pros: This mounting bracket was very easy to install on our drop ceiling. And is also very user friendly to adjust the swivel to go up or down, left or right for an accurate screen on our wall
Con: Did not have screws that fit in our Epson projector. I had to take our projector to a hardware store and make sure the screws would fit.
Other than not having the supplied screws this bracket is very nice to have.
Rating: 4 / 5
You get what you pay for, and sometimes not even that!! I was replacing my Atdec flush mount, because I needed to lower the projector about 12 inches, and man is there a difference in engineering! First off the lateral twist adjustment is worthless to unusable. There are 2 inaccessible screws to make this adjustment or you can rotate the ceiling mount plate about 15 degrees. The Ceiling mount is worthless for mounting in a single 2×8 ceiling stud because they designed it with 4 holes that are stupidly 3 inches apart. This wouldn’t even work for a double stud! I mounted mine diagonal using only 2 of the holes. There are 4 machine screws to hold the extension to the ceiling plate and four more to hold the projector mount to the extension but only ONE LOUSY SCREW for a friction plate that keeps the whole thing from crashing down!!!! In fact while I was adjusting everything (without the projector thank God), a tightened a screw that changed the shape of the extension and the friction set screw popped loose and the whole assembly hit the floor leaving me wondering how I was going to make sure that didn’t happen with my projector. I decided to drill a hole through the two parts of the extension and put a screw through it to prevent the two parts from pulling apart. – Believe it or not there is more but you get the idea.
Rating: 1 / 5
I bought this mount after reading the reviews and was a little edgy about it because of the “one star” review i read that said it might just drop from the ceiling…Well before i hung my projector from it I ACTUALLY GRABBED ONTO IT AND HUNG WITH THE FULL 140LBS OF MY BODY WEIGHT AND IT SLIPPED ABOUT 1/4″ AND THEN CAUGHT. I noticed that if you turn the sliding height adjustment bar upside down it will slip off SO MAKE SURE YOU PUT THAT BAR ON THE RIGHT WAY (try it both ways, the right one will be obvious) If you install it correctly you REALLY CANT BEAT THIS FOR THE MONEY. It is a must that you be somewhat mechanically inclined..if your unsure, have a friend on hand for second opinions and to help you hold everything steady. Once its up its easy to make adjustments and it looks sweet!
Rating: 5 / 5